Peeling - Over Hard / Slick surfaces

  • Updated

Peeling - Over Hard / Slick surfaces
Lack of adhesion of a coating causing peeling that exposes the substrate (e.g. the surface that was painted).

 

mceclip0.png

 

POSSIBLE CAUSE

  • Any coating (e.g. primer, paint, or stain) applied to a hard, slick, glossy surface is likely to peel because adhesion is difficult to achieve. The surface offers no profile (minute peaks and valleys caused by sanding the surface) for the coating to adhere to.

 

 

 

SOLUTION

  • Remove all surface contamination by washing with appropriate cleaner; rinse thoroughly and allow to dry.
  • Existing peeled or checked paint should be scraped and sanded to a sound surface.
  • Glossy surfaces should be sanded dull. If the surface is still hard and slick, Use a Bonding Primer to provide adhesion to the surface.
  • Test the coating in a 6" to 12" radius around any peeled areas to be sure the adhesion is adequate.

PRODUCTS RECOMMENDED

Was this article helpful?

0 out of 0 found this helpful