IMPORTANT – READ ENTIRE LABEL BEFORE USE
Quick release formula removes: adhesive, asphalt, blacktop, carbon black, caulk, diesel soot, duct tape,
foam insulation, fresh oil based paint & stain, liquid insulation, liquid nails, mastic, road & roofing tar,
silicone sealant, water seal, and more.
IMPORTANT: READ ENTIRE LABEL BEFORE USING
Effective on most surfaces. Not recommended on varnish, suede, leather, silk, rubber, or elastic items.
Always test in an inconspicuous area first.
DIRECTIONS: WET SURFACES
1. Using a disposable cotton towel, remove as much wet solution as possible.
2. Apply remover and allow to penetrate for 2-5 minutes.
3. Peel, scrape, or wipe.
4. Rinse.
DIRECTIONS: DRY SURFACES
1. Remove as much dry solution as possible by scraping clean.
2. Apply remover and let set up for 30-60 minutes.
3. Peel, scrape, or wipe.
4. Rinse