Concrobium Broad Spectrum Disinfectant II - Product Application

  • Created

IMPORTANT – READ ENTIRE LABEL BEFORE USE

Usage Guidelines
Suitable for use on all hard, non-porous surfaces where microorganisms or odours are a concern.
Heavily soiled surfaces require a pre-cleaning.

To Disinfect
Gross filth and heavy soil must be removed before applying cleaning solution. Apply to surfaces by cloth, sponge, brush, coarse spray or by immersing equipment using normal cleaning methods. All hard surfaces must be wet thoroughly, and remain wet for at least 10 minutes and allowed to air dry. Thoroughly rinse all treated food contact surfaces with potable water prior to use. For surfaces and/or objects that may come into direct contact with children at the mouthing stage of development, a rinse with potable water is recommended.

To Sanitize
Pre-clean heavily soiled areas. Wet surface. Let stand for 30 seconds. Thoroughly rinse all food contact surfaces with potable water prior to use. For surfaces and/or objects that may come into direct contact with children at the mouthing stage of development, a rinse with potable water is recommended.

To Clean & Deodourize Carpet/Fabrics
Concrobium Broad Spectrum Disinfectant II can be used on most fabrics that can be cleaned with water-based cleaners. Not for use on wool, silk, or suede. Always test for colour fastness and material compatibility on an inconspicuous area prior to use. Apply by sprayer, to ensure even coverage. Do not rinse, use hot water extraction wand to remove product from treated surfaces and then dry stroke carpet to remove excess moisture. Carpet can be air dried or fans may be used if carpet needs to dry more quickly.

Was this article helpful?

0 out of 0 found this helpful